Installation not working

[wasserth]

Hi,
is there an installer available for DrawEM? I tried for several hours to compile it from source by using setup.sh, but it always ended in some errors. Some dependencies are missing and when I try to install those, those are resulting in errors. An easier way to use DrawEM would be highly appreciated. Is there an installer or a docker image available?

[KEswar]

Hi. I am facing a similar problem. I would greatly appreciate if someone can help to solve this. The error is
sudo ./setup.sh -j 1
Installing ITK
git clone --recursive -b master https://github.com/InsightSoftwareConsortium/ITK.git /home/sgbc/DrawEM/build/ITK
cd /home/sgbc/DrawEM/build/ITK
git reset --hard v5.1.1
git submodule update
mkdir -p /home/sgbc/DrawEM/build/ITK/build
cd /home/sgbc/DrawEM/build/ITK/build
cmake /home/sgbc/DrawEM/build/ITK -DBUILD_EXAMPLES=OFF -DBUILD_SHARED_LIBS=ON -DBUILD_TESTING=OFF -DCMAKE_CXX_COMPILER=/usr/bin/g++-7 -DCMAKE_C_COMPILER=/usr/bin/gcc-7
make -j1
Installing VTK
git clone --recursive -b release https://github.com/Kitware/VTK.git /home/sgbc/DrawEM/build/VTK
cd /home/sgbc/DrawEM/build/VTK
git reset --hard v9.0.1
git submodule update
mkdir -p /home/sgbc/DrawEM/build/VTK/build
cd /home/sgbc/DrawEM/build/VTK/build
cmake /home/sgbc/DrawEM/build/VTK -DCMAKE_CXX_COMPILER=/usr/bin/g++-7 -DCMAKE_C_COMPILER=/usr/bin/gcc-7
make -j1
Installing MIRTK
git clone --recursive -b master https://github.com/BioMedIA/MIRTK.git /home/sgbc/DrawEM/build/MIRTK
cd /home/sgbc/DrawEM/build/MIRTK
git reset --hard 77d3f391b49b0cee9e80da774fb074995fdf415f
git submodule update
echo checking out drawem
Previous HEAD position was 37a94ad Merge pull request #26 from schuhschuh/fix-dependency-on-itk
HEAD is now at d2ff4e3 Merge pull request #31 from MIRTK/fix-ants-cmake-min-required-version
mkdir -p /home/sgbc/DrawEM/build/MIRTK/build
cd /home/sgbc/DrawEM/build/MIRTK/build
cmake /home/sgbc/DrawEM/build/MIRTK -DMODULE_Deformable=ON -DMODULE_DrawEM=ON -DDEPENDS_Eigen3_DIR=/home/sgbc/DrawEM/ThirdParty/eigen-eigen-67e894c6cd8f -DWITH_VTK=ON -DDEPENDS_VTK_DIR=/home/sgbc/DrawEM/build/VTK/build -DWITH_ITK=ON -DITK_DIR=/home/sgbc/DrawEM/build/ITK/build -DWITH_TBB=ON -DCMAKE_CXX_COMPILER=/usr/bin/g++-7 -DCMAKE_C_COMPILER=/usr/bin/gcc-7
cmake /home/sgbc/DrawEM/build/MIRTK -DMODULE_Deformable=ON -DMODULE_DrawEM=ON -DDEPENDS_Eigen3_DIR=/home/sgbc/DrawEM/ThirdParty/eigen-eigen-67e894c6cd8f -DWITH_VTK=ON -DDEPENDS_VTK_DIR=/home/sgbc/DrawEM/build/VTK/build -DWITH_ITK=ON -DITK_DIR=/home/sgbc/DrawEM/build/ITK/build -DWITH_TBB=ON -DCMAKE_CXX_COMPILER=/usr/bin/g++-7 -DCMAKE_C_COMPILER=/usr/bin/gcc-7 : command failed, see log file: /home/sgbc/DrawEM/setup.log
Thank you for your time in advance

[Emilyjane994]

Hi was anyone able to resolve this? i am also having some issues.