Hardware, Enclosure, No Access To Reset, No Access to Boot Button, Enclosure Rev ???

[ForrestErickson]

Describe the Failure / Bug
A clear and concise description of what the failure / bug is. Describe the problem NOT the fix.

Short Summary of the expected behavior: User may need to reset the DUT. User may need to put the DUT into Boot mode by pressing and holding Boot button and Pressing and releasing the Reset button.

Short Summary of the buggy behavior:
The user must remove the very poorly named "Top" cover of the enclosure to do the above.

[ForrestErickson]

A Problem, Volunteers in UK and EG do not (as of 2025 Nov) have printed wiring assemblies PWAs

With out PWAs it is hard to visualize the difficult access to the Reset button and the Boot Button.

A possible solution is for the volunteer to 3D print up a model of the PWA.
It could be sliced into two parts through the PCB and glued into one body.
There is a STEP file at: \krake\enclosure\KRAKE_PWArev1.step

Screen shot of the assembly STEP file in a slicer

Cut in to two parts

Select and flip as necessary and use auto place

Glue these two bodies to make a 3D of the PWA.

Here is a sliced file:
Krake_Rev2.zip
Note this file of the Rev2 assembly has the LED stand off spacers.

[ForrestErickson]

Labeling Requirement

The enclosure should have text to identify the buttons.

There is a "RESET" button and a "BOOT" button. See in the above screen shot.

Text Type

Text could be embossed or debossed as appropriate to avoid supports.

[Yhya99]

update the status of the issue

adding two buttons at a recessed area at the top shell of the encloser

and find it need to add a cover to the recessed area that's need to be easy to included to the top shell and be print inplace

the cover has latch snap mechanism to keep the cover closed

[Yhya99]

changing the cover shape and included it to the top shell

cross section view of the cover

cross section view of the rotating hinge