test not making it to webpage - Inland TN320 256GB NVME on Raspberry Pi 5 using Geekworm X1001 V1.1 PIP

[kmm0]

Starting INXI hardware identification...
System:
Kernel: 6.1.0-rpi7-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 Console: pty pts/1
Distro: Debian GNU/Linux 12 (bookworm)
Machine:
Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: c04170 serial:
CPU:
Info: quad core model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 rev: 1
Speed (MHz): avg: 3000 min/max: 1500/3000 cores: 1: 3000 2: 3000 3: 3000 4: 3000 bogomips: 432
Features: Use -f option to see features
Graphics:
Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
Display: x11 server: X.org v: 1.21.1.7 with: Xwayland v: 22.1.9 driver: N/A tty: 80x40
API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Network:
Device-1: driver: rp1 v: N/A port: N/A bus-ID: 0001:01:00.0
IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:
Drives:
Local Storage: total: 238.47 GiB used: 13.41 GiB (5.6%)
ID-1: /dev/nvme0n1 vendor: Inland model: TN320 NVMe SSD size: 238.47 GiB
temp: 42° (315 Kelvin) C
Message: No optical or floppy data found.
Partition:
ID-1: / size: 234.3 GiB used: 13.34 GiB (5.7%) fs: ext4 dev: /dev/nvme0n1p2
Info:
Processes: 161 Uptime: 1d 13h 52m Memory: total: 4 GiB available: 3.95 GiB used: 401.5 MiB (9.9%)
igpu: 4 MiB Init: systemd target: multi-user (3) Compilers: gcc: 12.2.0 Packages: 1363
Client: Sudo v: 1.9.13p3 inxi: 3.3.31
Running additional hardware identification tests...
Additional hardware identification tests completed.
Starting mass storage device identification...
Running HDParm tests ...
/dev/nvme0n1p2:
Timing O_DIRECT cached reads: 1244 MB in 2.00 seconds = 621.96 MB/sec
Timing O_DIRECT disk reads: 2268 MB in 3.00 seconds = 755.70 MB/sec
HDParm: 755.70 MB/sec - HDParmCached: 621.96 MB/sec
Running dd tests ...
133120+0 records in
133120+0 records out
545259520 bytes (545 MB, 520 MiB) copied, 1.1788 s, 463 MB/s
DD Write Speed: 463 MB/s
Running fio write test ...
Running fio read test ...
FIO results - 4k RandWrite: 70865 IOPS (283460 KB/s) - 4k RandRead: 100886 IOPS (403546 KB/s)
Running iozone test ...
Iozone: Performance Test of File I/O
Version $Revision: 3.489 $
Compiled for 64 bit mode.
Build: linux
Run began: Sun Jan 14 07:55:55 2024
Auto Mode
Include fsync in write timing
O_DIRECT feature enabled
File size set to 81920 kB
Record Size 4 kB
Command line used: iozone -a -e -I -i 0 -i 1 -i 2 -s 80M -r 4k
Output is in kBytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 kBytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
random random bkwd record stride
kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread
81920 4 194676 250383 274724 275185 62001 228735
iozone test complete.
RandRead: 62001 - RandWrite: 228735 - Read: 274724 - Write: 194676
Enter a description of your storage and setup (Example: Kingston A400 SSD on Pi 4 using StarTech SATA to USB adapter)
Description: Inland TN320 256GB NVME on Raspberry Pi 5 using Geekworm X1001 V1.1 PIP
(Optional) Enter alias to use on benchmark results. Leave blank for completely anonymous.
Alias (leave blank for Anonymous):

 Category                  Test                      Result

HDParm Disk Read 755.70 MB/sec
HDParm Cached Disk Read 621.96 MB/sec
DD Disk Write 463 MB/s
FIO 4k random read 100886 IOPS (403546 KB/s)
FIO 4k random write 70865 IOPS (283460 KB/s)
IOZone 4k read 274724 KB/s
IOZone 4k write 194676 KB/s
IOZone 4k random read 62001 KB/s
IOZone 4k random write 228735 KB/s

                      Score: 45910

Compare with previous benchmark results at:
https://pibenchmarks.com/

[jackra1n]

Im having the same problem but with Geekworm X1002 V1.1 hat and a Kingston NV2 nvme

[kmm0]

I don't think it's the Geekworm adapter, I also tried a SK Hynix Gold P31 1TB on the Geekworm and the Pimoroni, neither made it to the site.

ID-1: /dev/nvme0n1 vendor: Smart Modular Tech. model: SHGP31-1000GM size: 931.51 GiB

[kmm0]

This workaround from a closed issue worked.

https://pibenchmarks.com/benchmark/77698/ test for the SK Hynix Gold P31 1TB

Temporary Workaround
Instead of running the command

sudo curl https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh | sudo bash
like instructed on the web site, download the file with

curl -o Storage.sh https://raw.githubusercontent.com/TheRemote/PiBenchmarks/master/Storage.sh
then open the file in your favourite text editor and comment out the offending show-regs line in the script by adding a # at the start of the line.

Test_nvme=$(nvme list -o json 2>&1)

Test_nvme+=$(nvme show-regs "$BootDrive" -H 2>&1 | sed 's/;/!/g')

Test_smartctl=$(smartctl -x "$BootDrive" 2>&1 | sed 's/;/!/g' | sed '/^[[:space:]]*$/d')
Once you've made the change, run it with sudo bash ./Storage.sh. The results should appear on the web site. If you are using an NVMe boot drive, some details may be missing, but at least the results will appear properly.

[kmm0]

that workaround worked for the Sk Hynix drive and a Toshiba drive, but not for the Inland TN320

[jackra1n]

Thanks. That workaround did work for me

[mcpat-it]

Worked for me on Geekworm X1001 and Crucial P3 4TB

[spiceyux]

Same issue and workaround worked for me.
Geekworm x1000 and Inland TN325 512GB

[philrandal]

Same issue. Workaround seemed towork for me and script claimed the results were uploaded., but nothing has been shown on the page. Pi 5, Pimoroni NVMe base, Integral Series M 250GB M2 2280. Uploaded as user philr

[oviliz]

I have also commented the line
#Test_nvme+=$(nvme show-regs "$BootDrive" -H 2>&1 | sed 's/;/!/g' | sed 's/\x0//g')
and the submission finally ended up on the website. I have lost so many of them... :(

[mixpc]

Thank you for opening this thread. So helpful!
As per workaround, commented:

#Test_nvme=$(nvme list -o json 2>&1 | sed 's/\x0//g')
#Test_nvme+=$(nvme show-regs "$BootDrive" -H 2>&1 | sed 's/;/!/g' | sed 's/\x0//g')
#Test_smartctl=$(smartctl -x "$BootDrive" 2>&1 | sed 's/;/!/g' | sed '/^[[:space:]]*$/d')

and now results are uploaded. At last!