Version 00.94.03

Attempt to force the application to display in Light Theme regardless of the user's Windows Theme settings.

Version 00.94.02

Fixed aux channel switch positions greater than 6 not correctly displaying during Radio Setup.

Version 00.94.01

Corrected an error that prevented the Trigger Sources drop-down list being correctly populated on the Functions tab. This bug was introduced in the prior release (v0.94.00).

Version 00.94.00

• Project now compiled in newer version of Qt - Qt Creator 15.0.0, using Qt version 6.8.1, compiled for Windows using MinGW 13.1.0 64-bit compiler
• OP Config updated to display correctly on high resolution screens (greater than 1920x1080).
• Improved reliability of creating a serial connection with the TCB.

Version 00.93.78

This change has no bearing on the TCB - entries for flashing ATmega328 devices have been clarified. The Scout has been corrected as using the 328p chip.

Version 00.93.77

This change has no bearing on the TCB - we have added an entry for the Arduino UNO in the drop-down on the Firmware tab, for flashing your own hex files to UNOs. Although the UNO uses a ATmega328p chip, it wants to be written to at 115,200 baud, as opposed to the 57,600 which works for the Nano and boards using an FTDI interface.

Version 00.93.76

Added various validations that will prevent conflicts occurring from the multiple possible uses of the Aux output. If the Smoker Type is set to "Separate Heat & Fan" the Aux Output is reserved to drive the smoker fan, and consequently the options to "Flicker Lights during Engine Start" and to "Auto Flash the Aux Output with Cannon" will be disabled to prevent them from accessing the Aux output. Otherwise, the "Auto Flash Aux Output with Cannon" will take precedence over the "Flicker Lights." All this also reflects the fact that since the last release the flicker effect no longer applies to the Headlights output (Light 1) but instead now to the Aux output (because we are unable to create a realistic flickering effect on the Headlight output which is not PWM-capable).

Version 00.93.75

• On optional flickering effect can be applied to the headlights and brakelights during engine startup. This option is found on the "Lights & IO" tab under the heading "Light Effects."
• IMPORTANT NOTE: Changes in this release will cause all EEPROM settings on the TCB to be reverted to default after the firmware is flashed. It is advised to save an OPZ file of your settings before updating the firmware.

Version 00.93.73

Change descriptions of external outputs A & B functions from "Turn On" and "Turn Off" to "High" and "Low."

Version 00.93.72

• Add user-defined pulse time for General Purpose IO ports A & B.
• Minor bug fix that prevented the Blink function of the IO ports from being sanity checked against IO port settings.
• IMPORTANT NOTE: Changes in this release will cause all EEPROM settings to be reverted to default after the firmware is flashed. It is advised to save an OPZ file of your settings before updating the firmware.