242 hardware enclosure no access to reset no access to boot button enclosure rev

enclosure/COVER.scad

@@ -0,0 +1,161 @@
+
+$fs = 0.1;
+
+
+
+use <latch.scad>
+
+
+cover_length = 80;
+cover_width = 35;
+cover_thickness = 2.1;
+Resolution = 50;
+module round_hull(r,w)
+{
+
+$fn=Resolution;
+hull()
+{
+    circle(r);
+    translate([w,0,0,])circle(r);
+    }    
+
+    }
+module drafted_pin(radius, hieght)
+{
+
+
+c1 = radius;
+h = hieght;
+c2 =(h < c1)? c1 - h : 0;
+
+cylinder(h,c1,c2);    
+
+
+    }
+
+ module s_cover(width,length,thickness){
+
+
+
+
+     union(){ difference()
+    {
+    linear_extrude(thickness)round_hull(width/2,length-width);
+   translate([width/4+(length-width),0,0])cube([width/2,width,10],true);
+   translate([-width/4,0,0])cube([width/2,width,10],true);
+
+
+        } 
+
+            translate([(length-width),0,0])cylinder(h=thickness,r1 = width/2, r2 =width/2-(sqrt(2)*thickness));
+
+        }
+    }   
+module cover(width,length,thickness)
+    {
+//width = 30;
+//length = 60;
+//thickness = 2;
+
+module joint()
+        {
+
+
+ rotate([90,0,0])translate([3,4,0])drafted_pin(3,2);
+
+            }
+
+
+Resolution = 50;
+
+
+ union(){union(){       
+translate([0,width/2,0])  
+    s_cover(width,length,thickness);
+
+
+   rotate([90,0,0])translate([3,4,-width])cylinder(width,4,4);
+
+        joint();
+
+ }mirror([0,1,0])translate([0,-width,0]) joint();}
+
+
+ }
+
+
+
+
+
+
+
+
+module cover_unit(){
+difference(){union(){
+union()
+{
+translate([-15,-10,0]) cube([cover_length+3,cover_width+20,2.1]);
+translate([-2,-10,2])cube([10,10,8]);    
+}
+translate([0,cover_width,0])mirror([0,1,0]){
+    translate([-2,-10,2])cube([10,10,8]);
+    }
+}
+
+#translate([-1.7,0,0])cube([3,cover_width,3]);
+/*
+translate([0,30,0])mirror([0,1,0])rotate([90,0,0])translate([3,4,0])drafted_pin(3+0.15,2+0.15); 
+rotate([90,0,0])translate([3,4,0])drafted_pin(3+0.15,2+0.15);
+
+*/
+
+//scale([1,1,1.04])translate([0,0,-0.05])
+color("green"){cover(cover_width,cover_length,cover_thickness);}
+
+//color("red")translate([46.6,18,7])rotate([90,90,0])scale([1.05,1.05,1.05])lock_m();
+
+    translate([cover_length-cover_width/2-2.8,cover_width/2,2]) cube([2,6.5,3],true);
+
+//translate([3,15,-1])s_cover(cover_width,cover_length,cover_thickness+2);
+}
+
+
+difference(){
+translate([0,0.3,0])color("blue"){cover(cover_width-0.6,cover_length-1,cover_thickness);}
+#translate([cover_length-cover_width/2-9.6,cover_width/2-2.6,-1])cube([11,5+0.6,8]);
+}
+
+
+
+//width = 30-0.6;
+//length = 50-0.6;
+//thickness=2;
+
+
+difference(){
+color("red")translate([cover_length-cover_width/2-6.6,cover_width/2+2.7,7])rotate([90,90,0])lock_m();
+ /*difference()
+    {
+
+ color("green"){cover(cover_width,cover_length,cover_thickness);}
+
+ color("green")scale(0.99){cover(cover_width,cover_length,cover_thickness);}
+        }*/
+translate([-0.5,0,-0.2])translate([cover_length-cover_width/2,cover_width/2,cover_thickness])rotate([0,45,0])translate([1,0,0])cube([sqrt(2)*cover_thickness,cover_width+2,sqrt(2)*cover_thickness],true);
+
+}
+
+tollerance = 0.1;
+difference(){
+translate([cover_length-cover_width/2-1.8,cover_width/2-3.5,2])cube([3,7,3]);
+
+        translate([cover_length-cover_width/2-6.6,cover_width/2+3,6.2])    translate([4.5,-2.5,-11.7])
+       scale([1+tollerance,2,1+tollerance])translate([-4.5,2.5,11.7])rotate([90,90,0])lock_m();
+
+
+    }
+
+}
+
+cover_unit();