Inovelli - adding vzw31 red series dimmer switch

drivers/SmartThings/zwave-switch/fingerprints.yml

@@ -56,6 +56,12 @@ zwaveManufacturer:
     productType: 0x0003
     productId: 0x0001
     deviceProfileName: inovelli-dimmer
+  - id: "Inovelli/VZW31-SN"
+    deviceLabel: Inovelli Dimmer Red Series
+    manufacturerId: 0x031E
+    productType: 0x0015
+    productId: 0x0001
+    deviceProfileName: inovelli-dimmer-vzw31-sn
   - id: "Inovelli/VZW32-SN"
     deviceLabel: Inovelli mmWave Dimmer Red Series
     manufacturerId: 0x031E

drivers/SmartThings/zwave-switch/profiles/inovelli-dimmer-vzw31-sn.yml

@@ -0,0 +1,284 @@
+name: inovelli-dimmer-vzw31-sn
+components:
+- id: main
+  capabilities:
+  - id: switch
+    version: 1
+  - id: switchLevel
+    version: 1
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: Switch
+- id: button1
+  label: Down Button
+  capabilities:
+  - id: button
+    version: 1
+  categories:
+  - name: RemoteController
+- id: button2
+  label: Up Button
+  capabilities:
+    - id: button
+      version: 1
+  categories:
+    - name: RemoteController
+- id: button3
+  label: Config Button
+  capabilities:
+    - id: button
+      version: 1
+  categories:
+    - name: RemoteController
+preferences:
+  - name: "notificationChild"
+    title: "Add Child Device - Notification"
+    description: "Create Separate Child Device for Notification Control"
+    required: false
+    preferenceType: boolean
+    definition:
+      default: false
+  - name: "notificationType"
+    title: "Notification Effect"
+    description: "This is the notification effect used by the notification child device"
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        "255": "Clear"
+        "1": "Solid"
+        "2": "Fast Blink"
+        "3": "Slow Blink"
+        "4": "Pulse"
+        "5": "Chase"
+        "6": "Open/Close"
+        "7": "Small-to-Big"
+        "8": "Aurora"
+        "9": "Slow Falling"
+        "10": "Medium Falling"
+        "11": "Fast Falling"
+        "12": "Slow Rising"
+        "13": "Medium Rising"
+        "14": "Fast Rising"
+        "15": "Medium Blink"
+        "16": "Slow Chase"
+        "17": "Fast Chase"
+        "18": "Fast Siren"
+        "19": "Slow Siren"
+      default: 1
+  - name: "parameter158"
+    title: "158. Switch Mode"
+    description: "Use as a Dimmer or an On/Off switch"
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Dimmer (default)"
+        "1": "On/Off"
+      default: 0
+  - name: "parameter52"
+    title: "52. Smart Bulb Mode"
+    description: "For use with Smart Bulbs that need constant power and are controlled via commands rather than power. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Disabled (default)"
+        "1": "Smart Bulb Mode"
+      default: 0
+  - name: "parameter22"
+    title: "22. Aux Switch Type"
+    description: "Set the Aux switch type. Smart Bulb Mode does not work in Dumb 3-Way Switch mode."
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "None (default)"
+        "1": "3-Way Dumb Switch"
+        "2": "3-Way Aux Switch"
+        "3": "Single Pole Full Sine Wave"
+      default: 0
+  - name: "parameter1"
+    title: "1. Dimming Speed (Remote)"
+    description: "This changes the speed that the light dims up when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  Default=25 (2500ms or 2.5s)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 25
+  - name: "parameter2"
+    title: "2. Dimming Speed (Local)"
+    description: "This changes the speed that the light dims up when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=255 (Sync with parameter 1)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 255
+  - name: "parameter3"
+    title: "3. Ramp Rate (Remote)"
+    description: "This changes the speed that the light turns on when controlled from the hub. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=255 (Sync with parameter 1)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 255
+  - name: "parameter4"
+    title: "4. Ramp Rate (Local)"
+    description: "This changes the speed that the light turns on when controlled at the switch. A setting of '0' turns the light immediately on. Increasing the value slows down the transition speed. Value is multiplied by 100ms. 
+  (i.e 25 = 2500ms or 2.5s) Default=255 (Sync with parameter 3)"
+    required: false
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 255
+  - name: "parameter9"
+    title: "9. Minimum Level"
+    description: "The minimum level that the light can be dimmed. Useful when the user has a light that does not turn on or flickers at a lower level."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 1
+      maximum: 99
+      default: 1
+  - name: "parameter10"
+    title: "10. Maximum Level"
+    description: "The maximum level that the light can be dimmed. Useful when the user wants to limit the maximum brighness."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 2
+      maximum: 100
+      default: 100
+  - name: "parameter15"
+    title: "15. Level After Power Restored"
+    description: "The level the switch will return to when power is restored after power failure.
+  0=Off
+  1-100=Set Level
+  101=Use previous level."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 101
+      default: 101
+  - name: "parameter18"
+    title: "18. Active Power Reports"
+    description: "Power level change that will result in a new power report being sent.
+  0 = Disabled
+  1-32767 = 0.1W-3276.7W."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 32767
+      default: 100
+  - name: "parameter19"
+    title: "19. Periodic Power & Energy Reports"
+    description: "Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 32767
+      default: 3600
+  - name: "parameter20"
+    title: "20. Active Energy Reports"
+    description: "Energy level change that will result in a new energy report being sent.
+  0 = Disabled
+  1-32767 = 0.01kWh-327.67kWh."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 32767
+      default: 100
+  - name: "parameter50"
+    title: "50. Button Press Delay"
+    description: "Adjust the delay used in scene control. 0=no delay (disables multi-tap scenes), 1=100ms, 2=200ms, 3=300ms, etc."
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "0ms"
+        "1": "100ms"
+        "2": "200ms"
+        "3": "300ms"
+        "4": "400ms"
+        "5": "500ms (default)"
+        "6": "600ms"
+        "7": "700ms"
+        "8": "800ms"
+        "9": "900ms"
+      default: 5
+  - name: "parameter95"
+    title: "95. LED Indicator Color (w/On)"
+    description: "Set the color of the Full LED Indicator when the load is on."
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Red"
+        "7": "Orange"
+        "28": "Lemon"
+        "64": "Lime"
+        "85": "Green"
+        "106": "Teal"
+        "127": "Cyan"
+        "148": "Aqua"
+        "170": "Blue (default)"
+        "190": "Violet"
+        "212": "Magenta"
+        "234": "Pink"
+        "255": "White"
+      default: 170
+  - name: "parameter96"
+    title: "96. LED Indicator Color (w/Off)"
+    description: "Set the color of the Full LED Indicator when the load is off."
+    required: true
+    preferenceType: enumeration
+    definition:
+      options:
+        "0": "Red"
+        "7": "Orange"
+        "28": "Lemon"
+        "64": "Lime"
+        "85": "Green"
+        "106": "Teal"
+        "127": "Cyan"
+        "148": "Aqua"
+        "170": "Blue (default)"
+        "190": "Violet"
+        "212": "Magenta"
+        "234": "Pink"
+        "255": "White"
+      default: 170
+  - name: "parameter97"
+    title: "97. LED Indicator Intensity (w/On)"
+    description: "Set the intensity of the Full LED Indicator when the load is on."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 50
+  - name: "parameter98"
+    title: "98. LED Indicator Intensity (w/Off)"
+    description: "Set the intensity of the Full LED Indicator when the load is off."
+    required: true
+    preferenceType: number
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 5

drivers/SmartThings/zwave-switch/src/inovelli/can_handle.lua

@@ -3,6 +3,7 @@
 
 local INOVELLI_FINGERPRINTS = {
   { mfr = 0x031E, prod = 0x0017, model = 0x0001 }, -- Inovelli VZW32-SN
+  { mfr = 0x031E, prod = 0x0015, model = 0x0001 }, -- Inovelli VZW31-SN
   { mfr = 0x031E, prod = 0x0001, model = 0x0001 }, -- Inovelli LZW31SN
   { mfr = 0x031E, prod = 0x0003, model = 0x0001 }, -- Inovelli LZW31
 }
@@ -17,4 +18,4 @@ local function can_handle_inovelli(opts, driver, device, ...)
   return false
 end
 
-return can_handle_inovelli
+return can_handle_inovelli

drivers/SmartThings/zwave-switch/src/inovelli/sub_drivers.lua

@@ -5,5 +5,6 @@ local lazy_load = require "lazy_load_subdriver"
 
 return {
     lazy_load("inovelli.lzw31-sn"),
+    lazy_load("inovelli.vzw31-sn"),
     lazy_load("inovelli.vzw32-sn")
 }

drivers/SmartThings/zwave-switch/src/inovelli/vzw31-sn/can_handle.lua

@@ -0,0 +1,19 @@
+-- Copyright 2025 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+local INOVELLI_MANUFACTURER_ID = 0x031E
+local INOVELLI_VZW31_SN_PRODUCT_TYPE = 0x0015
+local INOVELLI_DIMMER_PRODUCT_ID = 0x0001
+
+local function can_handle_vzw31_sn(opts, driver, device, ...)
+  if device:id_match(
+    INOVELLI_MANUFACTURER_ID,
+    INOVELLI_VZW31_SN_PRODUCT_TYPE,
+    INOVELLI_DIMMER_PRODUCT_ID
+  ) then
+    return true, require("inovelli.vzw31-sn")
+  end
+  return false
+end
+
+return can_handle_vzw31_sn