Search results

The DCDC FET could use a soft-start capacitor and a testpoint on the back

Status: Open.

#99 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 26, 2021

Adding FPC footprint on both front and keypad boards for keypad connections

Status: Open.

#98 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 13, 2021

Adding testpoints for amplifier soldering check

Status: Open.

#97 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 13, 2021

GPIO mapping could use reconsideration

Status: Open.

#96 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 13, 2021

USB-C charging boards/USB-C mod board - need to add back PCB cutouts/drill markings?

Status: Open.

#95 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 13, 2021

Reroute trace in the keypad board bottom right corner

Status: Open.

#94 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Nov 13, 2021

Back/front board speaker polarity mismatch

Status: Open.

#93 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on May 13, 2019

Add "+, 1" and "-, 2" markings to DC-DC (for soldering)

Status: Open.

#92 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Apr 25, 2019

Add "top"/"bottom" layer markings to the boards

Status: Open.

#91 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Apr 25, 2019

Replace 10K power source switchover P-FET pulldown with 1K8

Status: Open.

#90 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Apr 11, 2019

Add alignment lines for the 2x20 female header on the front board

Status: Open.

#89 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Apr 2, 2019

Add I2C testpoints / QWIIC connector on back board

Status: Open.

#88 In ZeroPhone/ZeroPhone-PCBs;

· CRImier opened on Apr 2, 2019