Emacs For Common Lisp (Emacs4CL)

This repository provides a tiny .emacs file to set up Emacs quickly for Common Lisp programming. This document provides a detailed description of how to set it up and get started with Common Lisp programming.

This repository provides a good middle ground between configuring Emacs manually by installing SLIME, Paredit, etc. yourself with M-x package-install commands and installing Portacle. It promotes a do-it-yourself approach to automate customizing Emacs for Common Lisp programming. Here is how the development environment is going to look like:

If you are already comfortable with Emacs and only want to understand what is in the .emacs file, you can skip ahead directly to the Line-by-Line Explanation section that describes every line of this Emacs initialization file in detail.

Who Is This For?

Are you an absolute beginner to Emacs? Are you so new to Emacs that you don't even have ~/.emacs or ~/.emacs.d on your file system? Have you considered learning Common Lisp but when you picked up a book like Practical Common Lisp, you learnt that it recommends Emacs and SLIME for development environment and it seemed like a significant additional learning curve for you? If you answered "yes" to most of these questions, then this project is for you.

The .emacs file in this project provides you a quick way to get started with setting up your development environment. This document explains how to do so in a step-by-step manner. This document also explains the content of .emacs file in a line-by-line manner.

What About Portacle?

Portacle is fine. It is an often recommended Common Lisp development environment for beginners. It provides an Emacs-based fully featured integrated development environment for Common Lisp. Portacle consists of Emacs customized heavily with custom configuration and a rich selection of packages and tools that make it suitable for Common Lisp programming. However, some of the customizations done by Portacle look odd to an experienced Emacs user:

A default *scratch* buffer with more than 10 lines of comments that consume some valuable screen real-estate.
Enabling line numbers in all buffers including the SLIME Read-Eval-Print Loop (REPL) buffer. Enabling line numbers in Emacs is considered to be an antipattern by some experienced Emacs users. See the Opinion References section for more details on this.

More importantly, installing Portacle hides away the underlying details of what goes into making Emacs ready for Common Lisp development. Programmers who like to set up their tools from scratch may find that Portacle does not offer the opportunity to do so because it bundles all useful tools already.

Also, Portacle is still Emacs. To use Portacle effectively, you have to learn Emacs and SLIME anyway. If you are going to learn Emacs and SLIME anyway, you might as well set it up yourself. Then you can add only those customizations to Emacs that you need instead of Portacle deciding what your Emacs experience should be like.

This project provides a good middle ground between setting up Emacs from scratch manually and installing Portacle. It promotes a do-it-yourself approach to setting up Emacs for Common Lisp programming. More importantly, it helps you understand each step of the work that goes into customizing Emacs as an environment for Common Lisp programming.

Get Started

This section helps you to set up Emacs for Common Lisp development quickly and see what the end result looks like. Perform the following steps to get started:

Install SBCL and Emacs.

On macOS, enter the following command if you have Homebrew:
```
brew install sbcl
brew cask install emacs
```
On Debian, Ubuntu, or another Debian-based Linux system, enter the following command:
```
sudo apt-get install sbcl emacs
```
For other environments, download SBCL and Emacs from http://www.sbcl.org/platform-table.html and https://www.gnu.org/software/emacs/ respectively.
Copy the Emacs initialization file .emacs provided here to your home directory. Here is an example curl command to do so:
```
curl https://raw.githubusercontent.com/susam/emacs4cl/master/.emacs >> ~/.emacs
```
Start Emacs:
```
emacs
```
On macOS, you may receive the following error message in a dialog box: '“Emacs.app” can’t be opened because Apple cannot check it for malicious software.' To resolve this issue, go to Apple menu > System Preferences > Security & Privacy > General and click 'Open Anyway'.

It may take a minute or so for Emacs to start the very first time. When it starts the first time with the new Emacs initialization file obtained in the previous step, it installs the packages specified in it. This is only a one-time activity. The next time you start Emacs, it will start instantly. We will see how .emacs takes care of it in the line-by-line guide later.
Within Emacs, start SLIME by pressing the following key-sequence:
```
M-x slime RET
```
In the Emacs world (and elsewhere too), the prefix M- denotes the meta modifier key. It does not exist on most modern keyboards. Use the alt key or the option key as a modifier key or esc as a prefix key to enter M-.

For example M-x is going to be alt + x or option + x or esc x on a modern keyboard.

Similarly, RET denotes the enter key or the return key.
After SLIME REPL starts, enter the following expression at the CL-USER> prompt and press enter.
```
(format t "hello, world~%")
```
If the output "hello, world" appears in SLIME REPL, the development environment setup is complete.

Now that your environment is setup, read the next section to learn how to use this environment in more detail.

Step-by-Step Usage

Use SBCL

Steel Bank Common Lisp (SBCL) is a high performance Common Lisp compiler. It runs on several Unix and Unix-like systems such as Linux, FreeBSD, macOS, etc. It also runs experimentally on Windows. It is the most popular free and open source implementation of Common Lisp as of December 2020. See the Opinion References section for survey results related to this.

The steps provided below show how to run SBCL independently. This is not a typical way to run SBCL because most of the time we interact with SBCL via SLIME right from within Emacs. However running it independently once helps one appreciate that it is an independent program that compiles and executes Common Lisp code. Here are the steps:

Open your favourite editor, type this code, and save it as hello.lisp:
```
(format t "hello, world~%")
```
Then enter this command in the shell to run the program:
```
sbcl --script hello.lisp
```
Now start the SBCL Read-Eval-Print Loop (REPL) with the following command in the shell:
```
sbcl
```
An asterisk prompt appears. Enter a Common Lisp expression at the asterisk prompt like this and press enter:
```
(+ 1 2)
```
The result should appear as the output.
Similarly, enter the following expression at the SBCL prompt and press enter:
```
(format t "hello, world~%")
```
Finally, enter the following expression and press enter to exit the SBCL REPL:
```
(exit)
```

Use Emacs

Emacs is a very powerful and extensible editor. It comes with over 10,000 built-in commands. A small section like this can barely scratch the surface of Emacs. Yet, this section makes a modest attempt at getting you started with Emacs and then provides more resources to learn further. Perform the following steps to get started:

Start Emacs:
```
emacs
```
Within Emacs, enter the following command to open a file, say, ~/hello.txt:
```
C-x C-f hello.txt RET
```
A new buffer to edit hello.txt is created. If a file with that name already exists on your file system, then it loads the content of the file into the buffer.

Note that in the Emacs world (and elsewhere too), the notation C- denotes the ctrl modifier key. Thus C-x denotes ctrl + x.

The notation RET denotes the enter or return key.

Consecutive C- key sequences can be optimized by pressing and holding the ctrl key once at the beginning, pressing the other keys after that, and then releasing the ctrl key in the end. For example, to type C-x C-f, first press and hold ctrl, then press x, then press f, and then release ctrl. In other words, think of C-x C-f as C-(x f). This shortcut works for other modifier keys too.
Now type some text into the buffer. Type out at least 3-4 words. We will need it for the next two steps.
Move backward by one word with the following command:
```
M-b
```
Remember from the previous section that M- denotes the meta modifier key. The above command can be typed with alt + b or option + b or esc b.

If you face any issue with the alt key or the option key, read Emacs Wiki: Meta Key Problems.
Now move forward by one word with the following:
```
M-f
```
The C-g key sequence cancels the current command. This can be used when you mistype a command and want to start over or if you type a command partially, then change your mind and then you want to cancel the partially typed command. Try out these examples:
```
C-x C-f C-g
```
```
C-x C-g
```
Save the buffer to a file on the file system with this command:
```
C-x C-s
```
Quit Emacs:
```
C-x C-c
```

Now you know how to start Emacs, open a file, save it, and quit. Improve your Emacs knowledge further by taking the Emacs tutorial that comes along with Emacs. In Emacs, enter the key-sequece C-h t to start the tutorial.

The key-bindings to perform various operations like creating file, saving file, quitting the editor, etc. may look arcane at first, but repeated usage of the key-bindings develops muscle memory soon and after having used them for a few days, one does not even have to think about them. The fingers do what the mind wants effortlessly due to muscle memory.

While you are getting used to the Emacs key-bindings, keep this GNU Emacs Reference Card handy. Also, if you are using it in GUI mode, then the menu options can be quite helpful. The menu options contain frequently used operations. The option for each operation also displays the key-bindings that can be used to invoke the same operation. Also, bookmark the GNU Emacs Manual and refer to it when you need it.

Use SLIME

Superior Lisp Interaction Mode for Emacs (SLIME) is a very popular Emacs mode that adds support for interacting with a running Common Lisp process for compilation, debugging, document lookup, etc. while developing Common Lisp applications. Perform the following steps to get started with it:

Start Emacs:
```
emacs
```
Within Emacs, start SLIME by pressing the following key-sequence:
```
M-x slime RET
```
Remember that M-x translates to alt + x or esc x on a modern keyboard.
A new buffer named *slime-repl sbcl* should have now appeared with the following prompt:
```
CL-USER>
```
This is a Read-Eval-Print-Loop (REPL) where you can evaluate Common Lisp expressions.
Enter the following expression in the REPL:
```
(+ 1 2)
```
The following result should appear when you press enter:
```
3
```
We will now see how to work on a Lisp source file and send expressions to the REPL for evaluation using SLIME commands without having to leave Emacs. First, create a buffer for a new file, for example:
```
C-x C-f foo.lisp
```
Now enter this Lisp code into the buffer for foo.lisp:
```
(+ 1 2)
```
While the cursor is placed after the closing parenthesis (not on it, but after it), enter the following command:
```
C-x C-e
```
The result 3 should appear in a minibuffer at the bottom.

There is a lot more to SLIME than what is described above. To learn more about SLIME, see Slime User Manual. Also, keep this Slime Quick Reference Card handy.

Use Paredit

Paredit helps in keeping parentheses balanced and also in performing structured editing of S-expressions in Lisp code. It provides a powerful set of commands to manipulate S-expressions in various ways. Perform the following steps to get started with Paredit:

Run Emacs:
```
emacs
```
Open a Common Lisp source file:
```
C-x C-f foo.lisp
```
Type the following code only:
```
(defun square (x
```
At this point, Paredit should have inserted the two closing parentheses automatically. The code should look like this:
```
(defun square (x))
                -
```
The cursor should be situated just after the parameter x. The underbar shows where the cursor should be.
Type the closing parentheses now. Yes, type it even if the closing parenthesis is already present. The cursor should now skip over the first closing parenthesis like this:
```
(defun square (x))
                 -
```
Of course, there was no need to type the closing parenthesis because it was already present but typing it out to skip over it is more efficient than then moving over it with movement commands. This is, in fact, a very nifty feature of Paredit. We can enter code with the same keystrokes as we would without Paredit.
Now press enter to create a new line just before the last parenthesis. A newline is inserted like this:
```
(defun square (x)
  )
  -
```
Now type only this:
```
(* x x
```
Again, Paredit would have inserted the closing parenthesis automatically. The code should look like this now:
```
(defun square (x)
  (* x x))
        -
```

There is a lot more to Paredit than this. To learn more, see The Animated Guide to Paredit.

Note: While many Lisp programmers find Paredit very convenient and powerful while manipulating S-expressions in Lisp code, there are a few people who do not like Paredit because they find the Paredit behaviour intrusive. See the Opinion References section for more discussion on this topic.

Use Rainbow Delimiters

There is not much to learn about using Rainbow Delimiters. In the previous sections, you must have seen that as you type nested parentheses, each parenthesis is highlighted with a different color. That is done by Rainbow Delimiters. It colors each parenthesis according to its nesting depth level.

Note: Not everyone likes Rainbow Delimiters. Some people find parentheses in multiple colors distracting. See the Opinion References section for more discussion on this topic.

Line-by-Line Explanation

This section explains the .emacs file provided here line-by-line.

Tweak UI

The first few lines in our .emacs merely tweak the Emacs user interface. These are of course not essential for Common Lisp programming. However, many new Emacs users often ask how to customize the user interface to add a good color scheme and make it look minimal, so this section indulges a little in customizing the user interface. The actual Common Lisp related customization begins in the next section: Highlight Parentheses.

Here is a line-by-line explanation of the UI tweaks in .emacs:

Hide the menu bar:
```
(menu-bar-mode 0)
```
When Emacs runs in a GUI window, by default, starts with a menu bar, tool bar, and scroll bar. Experienced users use Emacs completely through the keyboard via the various key-bindings for various operations, so many of them hide these additional bars to make the Emacs window look clean and minimal.

If you are a beginner to Emacs, you might find the menu bar helpful initially, so you might not want this line in your Emacs initialization file. In that case, remove this line or just comment it out by inserting a semicolon (i.e., ;) before the opening parentheses.
Hide the tool bar and scroll bar:
```
(when (display-graphic-p)
  (tool-bar-mode 0)
  (scroll-bar-mode 0))
```
The when expression checks if Emacs is running with graphic display before disabling the tool bar and scroll bar. Without the when expression, we get the following error on Emacs without graphic display support: Symbol's function definition is void: tool-bar-mode. An example of Emacs without graphics support is emacs-nox on Debian 10.

Note that this is only an author's preference. You may comment out one or more of these lines if you want to retain the tool bar or scroll bar.
Inhibit the startup screen with the Welcome to GNU Emacs message from appearing:
```
(setq inhibit-startup-screen t)
```
If you are a beginner to Emacs, you might find the startup screen helpful. It contains links to tutorial, manuals, common tasks, etc. If you want to retain the startup screen, comment this line out.
Load a beautiful dark color theme known as wombat:
```
(load-theme 'wombat)
```
If you want to check the other built-in themes, enter M-x customize-themes RET. A new window with a buffer named *Custom Themes* appear. In this buffer, select any theme you want to test. After you are done testing, you can close this new window with C-x 0.

Highlight Parentheses

This following points describe how we enable highlighting of parentheses:

The next point shows how to enable highlighting of matching pair of parentheses. By default, there is a small delay between the movement of a cursor and the highlighting of the matching pair of parentheses. The following line of code gets rid of this delay:
```
(setq show-paren-delay 0)
```
This line of code must come before the one in the next point for it to be effective.
Highlight matching parentheses:
```
(show-paren-mode)
```
A pair of parenthesis is highlighted when the cursor is on the opening parenthesis of the pair or just after the closing parenthesis of the pair.

Install Packages

This section is essential to Common Lisp programming with Emacs. The following points describe how we automate the installation of Emacs packages we need:

The following code disables TLS 1.3 to work around a known bug in GNU Emacs versions 26.1 and 26.2:
```
(when (and (version< emacs-version "26.3") (>= libgnutls-version 30603))
  (setq gnutls-algorithm-priority "NORMAL:-VERS-TLS1.3"))
```
See https://debbugs.gnu.org/34341 for more details on the bug. This code is not required while using GNU Emacs version 26.3 or 27.1 or a later version although leaving this code intact should do no harm because this code checks whether the Emacs version is less than 26.3 before applying the workaround.
This is necessary for defining the package-archives list we will use in the next point.
```
(package-initialize)
```
Add Milkypostman’s Emacs Lisp Package Archive (MELPA) to the list of archives to fetch packages from:
```
(add-to-list 'package-archives '("melpa" . "https://melpa.org/packages/") t)
```
By default only Emacs Lisp Package Archive (ELPA) is in the list of archives to fetch from. The above line adds MELPA too to the list. If you are curious to see what the original value of package-archives was and what it is now due to the above line, enter C-h o package-archives RET.
Download package descriptions from package archives only if they have not been downloaded before:
```
(unless package-archive-contents
  (package-refresh-contents))
```
The first line checks whether package descriptions from package archives from archives have been fetched. See the ~/.emacs.d/elpa/archives directory for archive contents in case you are curious. If the archive contents have not been fetched then the second line fetches them. Thus the second line executes only when the Emacs initialization is loaded for the first time. Thus, the first time Emacs starts with the .emacs file of this repository, it takes a while to fetch the package archives. However, once the packages archived have been fetched and Emacs is started again later, it starts instantly because the code above takes care not to fetch package archives again when it is already cached locally.
When we install packages using package-install (coming up in the next point), a few customizations are written automatically into the Emacs initialization file (~/.emacs in our case). This has the rather undesirable effect of our carefully handcrafted ~/.emacs being meddled by package-install. To be precise, it is the custom package invoked by package-install that intrudes into our Emacs initialization file. To prevent that, we ask custom to write the customizations to a separate file at ~/.emacs.d/custom.el with the following code:
```
(setq custom-file (concat user-emacs-directory "custom.el"))
```
Install SLIME, Paredit, and Rainbow Delimiters only if they are not installed already:
```
(dolist (package '(slime paredit rainbow-delimiters))
  (unless (package-installed-p package)
    (package-install package)))
```
This loops iterates over each package name in a list of packages. For each package, it checks whether the package is installed with the package-installed-p function. If it is not installed, then it is installed with the package-install function. You can modify the list of packages in the first line to add other packages that you might need in future or remove packages that you do not want.

The first time Emacs starts with this initialization file, it takes a while to install the packages we need. However, once the packages are installed and Emacs is started again later, it starts instantly because the code above takes care to not attempt installing packages that are already installed.

Inferior Lisp Program

The following steps describe setting up the inferior-lisp-program variable so that Emacs can use SBCL to load and execute SLIME:

Emacs uses a variable named inferior-lisp-program to start SLIME. The use of this variable can be seen in the next point. This variable specifies the program to be invoked for loading and executing SLIME. We will set this to just sbcl, i.e., just the program name without the complete path. Avoiding absolute path of SBCL in Emacs initialization file has the advantage that the same initialization file can work well on other systems too where the location of SBCL may be different.

On macOS, when we install SBCL using brew install sbcl, the compiler binary executable is written to /usr/local/bin/sbcl. The path /usr/local/bin is generally available in the shell's $PATH environment variable, so when Emacs is launched from the shell, its exec-path variable contains /usr/local/bin. As a result, it can find sbcl and start SLIME successfully.

However, when Emacs is launched from the desktop (say, from macOS Dock), it does not have /usr/local/bin in its exec-path, so it fails to start SLIME with this error: Searching for program: No such file or directory, sbcl. The following line of code works around this issue by adding /usr/local/bin to the exec-path variable:
```
(add-to-list 'exec-path "/usr/local/bin")
```
Now there are several other ways to resolve this issue. A popular way is to specify the absolute path of SBCL as the inferior-lisp-program. Yet another way is to configure macOS desktop such that when a program is launched from GUI, it contains /usr/local/bin in its PATH.

The workaround shown above is recommended in this document for two reasons. Firstly, we don't want to hard-code absolute path of SBCL in the Emacs initialization file, so that the same initilization file can work well on other systems where the location of SBCL may be different. Secondly, we want to keep the workaround minimally invasive, so that we don't have to go around meddling with the desktop settings only for the sake of Emacs.
Specify the program to be invoked for loading and executing SLIME:
```
(setq inferior-lisp-program "sbcl")
```

Add Hooks

This section describes how to enable Paredit and Rainbow Delimiters. These are not absolutely essential for having an interactive programming environment for Common Lisp. However many programmers find them useful while some do not find them useful.

In case you decide not to use either Paredit or Rainbow, then you may skip this section. In that case, you might also want to remove these packages from the dolist expression of .emacs.

Enable Paredit while editing Emacs Lisp code:
```
(add-hook 'emacs-lisp-mode-hook 'enable-paredit-mode)
```
Paredit helps in keeping parentheses balanced and in performing structured editing of S-expressions. While we configure it to be used for Common Lisp programming, we might as well configure it for editing Emacs Lisp code too. Then the experience of editing Emacs Lisp code and that of editing Common Lisp code will be consistent with each other.

To test that Paredit is enabled for editing Emacs Lisp code, open a new Emacs Lisp file, say, foo.el. Then type (. Paredit should automatically insert the corresponding ).
Enable Paredit in eval-expression minibuffer:
```
(add-hook 'eval-expression-minibuffer-setup-hook 'enable-paredit-mode)
```
To test this, enter M-: to bring up the eval-expression minbuffer and type (. Paredit should automatically insert the corresponding ).
Enable Paredit while interactively evaluating Emacs Lisp expressions in inferior-emacs-lisp-mode (IELM):
```
(add-hook 'ielm-mode-hook 'enable-paredit-mode)
```
To test this, enter M-x ielm RET. When the *ielm* buffer appears, type (. Paredit should automatically insert the corresponding ).
Enable Paredit while editing Common Lisp code:
```
(add-hook 'lisp-mode-hook 'enable-paredit-mode)
```
To test this, open a new Common Lisp source file, say, C-x C-f foo.lisp RET. Then type (. Paredit should automatically insert the corresponding ).
Enable Paredit in Lisp interaction mode:
```
(add-hook 'lisp-interaction-mode-hook 'enable-paredit-mode)
```
To test this, first open a non-Lisp file, say, C-x C-f foo.txt RET. Now type (. Note that no corresponding ) is inserted because we are not in Lisp interaction mode yet. Delete (. Then start Lisp interaction mode with the command M-x lisp-interaction-mode RET. Type ( again. Paredit should now automatically insert the corresponding ).
Enable Paredit in SLIME REPL:
```
(add-hook 'slime-repl-mode-hook 'enable-paredit-mode)
```
To test this, start SLIME with M-x slime RET. Then type ( in SLIME REPL. Paredit should automatically insert the corresponding ).
When we press the backspace key or delete key to delete a parenthesis in the SLIME REPL, Paredit fails to keep the parentheses balanced because SLIME interferes with Paredit by grabbing the delete key. To fix this issue, use the following code:
```
(defun override-slime-del-key ()
  (define-key slime-repl-mode-map
    (read-kbd-macro paredit-backward-delete-key) nil))
(add-hook 'slime-repl-mode-hook 'override-slime-del-key)
```
To test this, start SLIME with M-x slime RET. Then type (+ 1 (+ 2 (+ 3 4))). Even though, the closing parentheses ))) will be automatically inserted, type them out to advance the cursor to the end of the line. When you type ) even if it is already present, Paredit just skips over the already present ). Once you are at the end of the line, press backspace or delete multiple times. Paredit will keep the parentheses balanced at all times.
Enable Rainbow Delimiters while editing Emacs Lisp code:
```
(add-hook 'emacs-lisp-mode-hook 'rainbow-delimiters-mode)
```
Rainbow Delimiters color nested parentheses with different colors according to the depth level of each parenthesis.

To test this open a new Emacs Lisp file, say, foo.el. Then type ((((. Rainbow Delimiters should color each parenthesis differently.
Enable Rainbow Delimiters while interactively evaluating Emacs Lisp expressions in inferior-emacs-lisp-mode (IELM):
```
(add-hook 'ielm-mode-hook 'rainbow-delimiters-mode)
```
To test this, enter M-x ielm RET. When the *ielm* buffer comes up, type ((((. Rainbow Delimiters should color each parenthesis differently.
Enable Rainbow Delimiters while editing Common Lisp code:
```
(add-hook 'lisp-mode-hook 'rainbow-delimiters-mode)
```
To test this, open a new Common Lisp source file, say, foo.lisp. Then type ((((. Rainbow Delimiters should color each parenthsis differently.
Enable Rainbow Delimiters in Lisp interaction mode:
```
(add-hook 'lisp-interaction-mode-hook 'rainbow-delimiters-mode)
```
To test this, first open a non-Lisp file, say, foo.txt. Now type ((((. Then start Lisp interaction mode with the command M-x lisp-interaction-mode RET. Rainbow Delimiters should now color each parenthesis differently.
Enable Rainbow Delimiters in SLIME REPL:
```
(add-hook 'slime-repl-mode-hook 'rainbow-delimiters-mode)
```
To test this, start SLIME with M-x slime RET. Then type ( in SLIME REPL. Rainbow Delimiters should automatically insert the corresponding ).

You may have noticed that we did not enable Rainbow Delimiters for eval-expression. That is because it does not work as expected as of Dec 2020. See Fanael/rainbow-delimiters#57 for more details.

Opinion References

Forums

The following community forums are available for asking questions and seeking help regarding this project:

Reddit: r/spxy
Matrix: #spxy:matrix.org
Freenode: #spxy

Although these community forums are focussed on mathematics and computer science, many members of these forums are very experienced in both Emacs and Common Lisp.

Also, please feel free to connect with me on Twitter and share your feedback, questions, and ideas with me.

License

This is free and open source software. You can use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of it, under the terms of the MIT License. See LICENSE.md for details.

This software is provided "AS IS", WITHOUT WARRANTY OF ANY KIND, express or implied. See LICENSE.md for details.

Support

To report bugs, suggest improvements, or ask questions, please create a new issue at http://github.com/susam/emacs4cl/issues.

Name		Name	Last commit message	Last commit date
Latest commit History 19 Commits
.github		.github
.emacs		.emacs
.gitignore		.gitignore
CHANGES.md		CHANGES.md
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

Emacs For Common Lisp (Emacs4CL)

Contents

Who Is This For?

What About Portacle?

Get Started

Step-by-Step Usage

Use SBCL

Use Emacs

Use SLIME

Use Paredit

Use Rainbow Delimiters

Line-by-Line Explanation

Tweak UI

Highlight Parentheses

Install Packages

Inferior Lisp Program

Add Hooks

Opinion References

Forums

License

Support

About

Uh oh!

Releases

Packages

Languages

callhands/emacs4cl

Folders and files

Latest commit

History

Repository files navigation

Emacs For Common Lisp (Emacs4CL)

Contents

Who Is This For?

What About Portacle?

Get Started

Step-by-Step Usage

Use SBCL

Use Emacs

Use SLIME

Use Paredit

Use Rainbow Delimiters

Line-by-Line Explanation

Tweak UI

Highlight Parentheses

Install Packages

Inferior Lisp Program

Add Hooks

Opinion References

Forums

License

Support

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages