RISCV Console - An attempt to do a game console

This project contains a chipyard-based hardware compilation for the ULX3S board. It runs linux until certain point, and only supports bootrom bootloaders. The intention is probably run some programs to do graphics via HDMI.

Instructions

Clone using:

git clone https://github.com/ckdur/RISCVConsole.git
cd RISCVConsole
git submodule update --init
cd hardware/chipyard
./scripts/init-submodules-no-riscv-tools.sh

To create the .bit file, please run:

export RISCV=/path/to/riscv32imac
cd fpga/ULX3S
make pack
sudo make program

Linux

For linux compiling, we offer also a repository named linux-custom:

git clone https://github.com/ckdur/linux-custom.git
cd linux-custom
git submodule update --init --recursive

# Creating buildroot
export XLEN=32
export RISCV=/path/to/riscv32imac
./run_buildroot.sh

# Creating linux
./run_linux.sh

# Creating OpenSBI
./run_opensbi.sh

From here, we format an SD card, and create a partition with the bootloader:

git clone https://github.com/tmagik/gptfdisk.git
cd gptfdisk
make all
sudo ./gptfdisk /dev/sdX

Steps:

• Create GPT partition (n)
• Can be anywhere, but the size has to be less than 32M (or 65535 sectors)
• Use code 5202 for identify the partition as the bootloader (Stage 2 bootloader)

Then, copy the firmware of the opensbi to the partition

cd linux-custom
sudo dd if=./opensbi/build/platform/ratona/firmware/fw_payload.bin of=/dev/sdX1 conv=fsync bs=4096

Toolchain

A compilation of 32-bit toolchain should work. The configuration that worked is as follows:

git clone https://github.com/riscv/riscv-gnu-toolchain.git
cd riscv-gnu-toolchain
sudo mkdir /opt/riscv32imac
sudo chown -R $USER /opt/riscv32imac
./configure --prefix=/opt/riscv32imac --with-arch=rv32imac --with-abi=ilp32
make && make linux

QEMU

A test custom board was also done for QEMU. Compile it using:

cd linux-custom
./run_qemu.sh