LOGO Shutters (Home Assistant)

Custom cover platform for Siemens LOGO! based shutter/covers driven by self-holding relays. Each config entry represents one cover and uses existing Home Assistant entities (e.g., Modbus switches/binary_sensors) for control and feedback.

Features

• Per-cover config (add one integration entry per cover)
• Use existing switch entities for up and down
• Optional binary sensors for moving up/down feedback; when provided, manual/physical moves are tracked as motion starts/stops
• Time-based position tracking with configurable open/close durations
• Optional initial position restore value
• Optional overrun time at fully open/closed for motor settle
• Configurable stop sequences (separate for up/down; optional common fallback)
• Configurable shade position + entity service logo_shutters.set_shade
• Fully HACS compatible

Install (HACS)

1. Add this repository as a custom repository in HACS (category: integration).
2. Install LOGO Shutters.
3. Restart Home Assistant.
4. Add the integration via Settings → Devices & Services → Add Integration → LOGO Shutters.

Stop sequence format

Provide a YAML/JSON list where each step defines a service, optional entity_id, optional service_data, and optional delay between steps. You can set:

• stop_sequence_up: used when stopping an up/open movement
• stop_sequence_down: used when stopping a down/close movement
• stop_sequence: optional fallback if direction is unknown

Example:

- service: switch.turn_off
  entity_id: switch.logo_up
- service: switch.turn_off
  entity_id: switch.logo_down
- service: switch.turn_on
  entity_id: switch.logo_stop
  delay: 0.2

If no stop sequence is provided, both direction switches are turned off.

Shade service

• Configure shade_position (0-100) per cover in options.
• Call service logo_shutters.set_shade with entity_id of the cover to move it to that percentage.

Notes

• Position is estimated from timing; add limit sensors if you need exact positioning.
• On restart, the cover restores the last known position if available; otherwise it uses the configured initial position.